The glass fiber production process

In the production of glass fiber adhesive solution concentration measurement

Glass fiber (glass fiber cotton) consists of very fine short glass fiber by spinning or molten glass (silica) blowing process.

In the process, in order to fiber together, would use the glue solution, the adhesive is also used as colorants products.

Production of insulation cotton in glass furnace, first of all make molten glass flows downward through an annular;Then, use the air blowing nozzle flow to make molten glass blowing to filaments;

Holds together in the end, the glass after collection and the packaging used for insulation, and the rest of the binder liquid waste sent to precipitation and removing particulate matter.

Before the removal of residual adhesive solution, it contains solids to determine solutions that exist in the resin, ammonium sulfate, the content of phenol and other components.

Because of adhesive solution contains colorants are difficult to handle, so waste liquid adhesive can't discharge to the local sewage system, need to be collected from the production and recycling.

Visa K - PATENTS^®In situ online refractometer can be used to determine the content of waste liquor of modified adhesive solids, to control the recharge of the new adhesive.

Read the application instructions, detailed understanding of the process.

Fill out the form, you can download the PDF format of the application.

returnAll chemicals, and similar products