Metal processing and mechanical processing

In the process of metal machining and mechanical machining measuring hydraulic oil, cutting oil, cooling lubricants and cleaning fluid concentration

In the process of metal processing, can be usedLubricating oilorMetalworking fluidFor cooling, lubrication and corrosion resistance.

With the passage of time, the use of cutting fluid are chip and fine dust, oil, bacteria and dissolved salt pollution.Therefore, in order to prevent failure, liquid monitoring pH value, water hardness and liquid concentration is very important.

Visa K - PATENTS^®In situ online refractometer is accurate and the continuous measure of the ratio of cooling agent and water.The in situ refractometer can be used in metal processing the following stages:

1.Quenching/tempering and casting process.By measuring the concentration of the liquid used to ensure the quality of the finished product.

2.The cooling/cutting.Control of incoming material and recycling the concentration of the cooling lubricant in pipeline.

3.Machine wash.To test whether cleaning fluid in the right level of concentration in order to ensure to remove excess oil and grease.

4.Component flush.Control flushing fluid concentration and whether need to add supplementary fluid.

Read the application instructions, detailed understanding of metal machining and mechanical machining process.

Fill out the form, you can download the PDF format of the application.

returnAll chemicals, and similar products